Search results for: 'CSI-B-1'
5
Results
in category
Products
Product category
The smart compact power unit CO1S is used for fluid power supply in oil hydraulic systems in short-term operation and intermittent duty (S2, S3). It features high power density combined with small dimensions. The accumulator charging function enables the required system pressure to be maintained for a long period after the drive unit has been switched off. Continuous condition monitoring of the unit is achieved by means of integrated smart sensors. The continuous data exchange between the unit and the machine controller is performed via IO-Link communication – whether it’s condition monitoring, reporting that operating parameters are outside of the permitted limits or automatable accumulator closing pressure measurement for p0 assessment. The CO1S is the key to communication with your machine and a key component in total predictive maintenance (TPM).
Product category
<div><p>Whether it be shipbuilding or machine tool, mobile crane or steel mill, machine construction or offshore, EX protection or laboratory applications. or even applications with hydrogen as a medium. Our extensive product range has the right pressure transmitter for your application.</p></div><div><p>Series</p><ul><li>HDA 4000, for mobile and stationary hydraulics, various interfaces (CAN, HART),<br /> Depending on version<br /> for explosive atmospheres with ATEX, CSA, IECEx approval,<br /> For applications with increased functional safety in acc. with EN ISO 13849-1 (PL d Cat. 3),<br /> With flush membrane,<br /> For shipbuilding and offshore with approval from:<br /> - American Bureau of Shipping<br /> - Lloyds Register of Shipping<br /> - Det Norske Veritas / Germanischer Lloyd<br /> - Bureau Veritas <div> </div></li><li>HDA 4000 / HDA 8000 for hydrogen applications</li><li>HDA 4800, extremely precise, for steel and rolling mills, laboratory applications, test benches</li><li>HDA 7000, for series applications in the industry and mobile sectors with tight installation spaces,<br /> - Compact design<br /> - Optionally CANopen-enabled<br /> - Optionally with front membrane</li><li>HDA 8000, for series applications in the industry and mobile sectors<br /> - With ECE type approval for road vehicles<br /> - Optionally for applications with increased functional safety in acc. with EN ISO 13849-1 (PL d Cat. 2) or DIN EN 61508 (SIL 2)</li><li> HPT 1000, for series applications in extremely small installation spaces<br /> - Small, compact design<br /> - Robust<br /> - Optionally CANopen/SAE J1939<br /> - Optionally with IO-Link interface<br /> - Optionally "smart"<br /> </li></ul><p>Technology</p><ul><li> Thick-layer strain gauge on ceramic membrane (low setting range)</li><li> Thin-film strain gauge on stainless steel membrane (low and high setting range)</li></ul><p> Standard setting ranges </p><p> from 0 to 1 and 0 to 600 / 2000 bar relative pressure, depending on version</p><ul><li>Up to 2.5 bar absolute pressure</li><li> Calibration also in PSI and MPa</li><li>Other setting ranges or special calibration on request</li></ul></div>
Product category
For particle separation from dry gases<p><strong>Features</strong></p><ul><li class="libreak">Reversible double stainless-steel filter</li><li class="libreak">Double Block and Bleed variant for applications with high pressures and hazardous gases</li><li class="libreak">Low-Pressure variant available for applications with low pressures</li></ul><p><strong>Advantages</strong></p><ul><li class="libreak">Pressure-loss-optimised design</li><li class="libreak">Reliable filtration of particulate contamination down to 0.1 μm</li><li class="libreak">Compact design</li><li class="libreak">Double-sealing design for hazardous gases</li><li class="libreak">Design with no weld seams for best corrosion resistance (H2S)</li><li class="libreak">No pressure loss caused by switchover process</li><li class="libreak">Simple filter element change</li><li class="libreak">High contamination retention capacity for the filter elements</li><li class="libreak">No reduction in cross-section (particularly change-over valve and filter element)</li><li class="libreak">No welded parts</li></ul>
Product category
For particle and aerosol separation – optionally with integrated cyclone pre-separator<p><strong>Features</strong></p><ul><li class="libreak">Filtration of moist gases</li><li class="libreak">With integrated cyclone pre-separator for applications where moist gases and a large amount of aerosols, oil mists and condensate can be expected</li><li class="libreak">Variants: <br /> - Single filter<br /> - Double filter (single block)<br /> - Double filter (double block and bleed )</li></ul><p><strong>Advantages</strong></p><ul><li class="libreak">Reliable filtration of fluid and particulate contamination down to 0.1 μm</li><li class="libreak">Double-sealing design for hazardous gases</li><li class="libreak">Design with no weld seams for best corrosion resistance (H2S)</li><li class="libreak">No pressure loss caused by switchover process</li><li class="libreak">Simple filter element change</li><li class="libreak">High contamination retention capacity for the filter elements</li><li class="libreak">No reduction in cross-section (particularly change-over valve and filter element)</li><li class="libreak">Cost reduction in overall system thanks to flow- and pressure-loss-optimised integrated cyclone pre-separator</li></ul>
0
Result
in category
Topics & Solutions
1
Result
in category
Downloads
CSI-B-1 ConditionSensor Interface
Product brochure
No details
English
(294 KB)
Is your file not listed?
To our download & media center