Flexible bell housing with oil-air cooler

Compact HYDAC design and inexpensive solution

Bell housing in accordance with VDMA 24561 Form C
Unproblematic replacement of the forms A, B and C with one another possible in accordance with VDMA 24561
Can be supplied for almost all hydraulic pumps
Processing of both flange-mounting sides finished
Bell housing with damping and cooling element (air-oil cooler)
Fan wheel (mounted on the motor shaft) included in the scope of delivery
For 2-pole, 4-pole, 6-pole IEC standard motors (1000–3000 rpm)
Design B5, B35, V1, V15
Mineral oil in accordance with DIN 51524, other media upon request
With optional bell support foot bracket
Horizontal or vertical installation possible

Cooling element:

Supply and discharge with G3/4", gasket-sealing
Max. 16 bar operating pressure
Max. permitted oil temperature +100°C
The maximum temperature difference between oil inlet and ambient temperature may not exceed 50°C

Delivery programme:

Series 2001 for motor size 80 (0.55–0.75 kW with 1500 rpm)
Series 200 for motor size 90S – 90L (1.1–1.5 kW with 1500 rpm)
Series 250 for motor size 100L – 112M (2.2 – 4 kW with 1500 rpm)
Series 300 for motor size 132S – 132M (5.5 – 7.5 kW with 1500 rpm)
Series 350 for motor size 160M – 160L (11 – 15 kW with 1500 rpm)
Series 3501 for motor size 180M – 180L (18.5 – 22 kW with 1500 rpm)

SKU

GP_1000422033

learn more ...

Filter selection

Reset filter